Though Mother Nature provides stones that vary from one another there are a few more processes that needs to be done on the stones to ensure that the stone if usable. Though the stones are almost well made, little fine tunings are needed to ensure that these stones can be used to make that beautiful home.
While purchasing a natural stone as the flooring tile it is important that one should know the various finishes that a manufacturers use. This will help in getting a better idea of the design and will ensure where these needs to be placed to make those beautiful homes. The same stone can look completely different with a new type of finishing.
This gives the stone a mirror like shine; the fabricators are used for this purpose to ensure that the beauties of the crystals are emphasized within the stone. The type of the stone will determine how frequently the stone needs to be polished and how long the polish will last.
This produces more of a flat matte or a satin finish to the tile. This is done by avoiding the last stage of the polishing. This type of finishing will require very little maintenance and will have very little scratches. This can be used for slate, limestone and marble stones.
Acid Washed Finish:
This gives a very antique finish. After the stone is polished it is washed with acid. This will remove the shine and expose the crystal structure of the stone. The scratches rarely show with this finish. Almost all stones can use this kind of finishing.
This kind of finishing gives a more rustic appearance to the tile. The polishing that is done after the cutting is to an extent to just remove the saw marks but not honed it. This has been confirmed by most of the Tile Stores in Edmonton.
This is done by passing a blowtorch over the stone. This will heat the crystals in the stone till they explode, therefore giving it a rough surface, which is ideal in wet places like the shower and around the swimming pool. Granite is the best stone for this kind of finishing.
Split faced finishing:
This makes the surface of the tile a rough but not as abrasive as the flamed finish. The hand cutting quarries leave that natural cleft of the stone. This kind of finishing is usually applied to the slate.
This gives the stone a lovely smooth or pitted surface which is broken or rounded around the corner. These tiles are small in size and are usually for the borders and the decorative pieces. Marbles, travertine and limestone are the best used for the tumbled finish according to top seller, Tile Town Edmonton.
This gives a look which wear over time. This is achieved by brushing the surface with hard plastic or metallic brushes. This will remove the softer part of the stone and creates a worn out look.